Contact | Company Info | Warranty | Repair | Home
Mechanical Force Gauges Digital Force Gauges Torque Testers Manual Test Stands Motorized Test Stands Attachments Push / Pull Testers Crimp Testers Peel Testers Spring Testers Puncture Testers Compression Testers Strength Testers Force Data Acquisition Torque Data Acquisition Calibration/Repair Trade In

Home | pull testers

Digital Pull Tester – PT-DPS

PRICING
DELIVERY
SUPPORT
  • Horizontal test stand
  • DS2 Digital Force gauge (choice of range)
  • WG-1 Grip
  • Max Load: 220 lbf
  • Outstanding accuracy of ±0.2%
  • Real time and peak mode (selectable)
  • Newton, lb and Kg units are selectable
  • RS-232C, Digimatic and analog outputs
     

WG-1

The Model PT-DPS is a digital pull tester for checking of pull-off force values of electrical leads, crimped terminals, connectors, and soldered parts.
Complete with test stand, DS2 force gauge, wire grip and wire terminal grip.
WG-1 grip is perfect for pull testing crimp on terminals. Set the opening size by turning the wingnut until jaws contact sample, then back off a little until the sample slides into the jaws from the side. Then you can simply slide the next sample into the jaws when you are ready to test.

 
DS2 Ranges (Resolution) Accuracy: ±0.2% F.S. ±1 LSD     
Model
Capacity (Resolution)
 
Pounds/Ounces
Kilograms/Grams
Newtons
DS2-0.4
7.00 (0.01 ozf)
200.0 (0.1 gf)
2.000 (0.001 N)
DS2-1
18.00 (0.01 ozf)
500.0 (0.1 gf)
5.000 (0.001 N)
DS2-4
4.400 (0.001 lbf)
2.000 (0.001 kgf)
20.00 (0.01 N)
DS2-11
11.00 (0.01 lbf)
5.000 (0.001 kgf)
50.00 (0.01 N)
DS2-44
44.00 (0.01 lbf)
20.00 (0.01 kgf)
200.0 (0.1 N)
DS2-110
110.0 (0.1 lbf)
50.00 (0.01 kgf)
500.0 (0.1 N)
DS2-220
220.0 (0.1 lbf)
100.0 (0.1 kgf)
1000 (1 N)
Use an 'R' suffix for reverse display units (for use on vertical test stands)

Click here for complete DS2 force gauge specs