Contact | Company Info | Warranty | Repair | Home
Mechanical Force Gauges Digital Force Gauges Torque Testers Manual Test Stands Motorized Test Stands Attachments Push / Pull Testers Crimp Testers Peel Testers Spring Testers Puncture Testers Compression Testers Strength Testers Force Data Acquisition Torque Data Acquisition Calibration/Repair Trade In

Home | motorized test stands

Motorized Vertical Test Stands – MV-220
 
mv-100.JPG (7533 bytes)
Force gauge sold separately

MV-220AC (Auto Cycle Type)
Max Load: 220 lbf

PRICING
DELIVERY
SUPPORT
  • One stand for both compression (push) and tension (pull) tests
  • Stroke: 16"
  • Auto cycle feature
  • Optional dynamic and static distance meter available


 

Speed Configurations
Standard Speed
 0.4~9.4"/min
Optional High Speed
 0.7~23"/min
Optional Low Speed
 0.15~4.2"/min
Specify speed when ordering
 

These motorized test stands offer consistent and reliable force testing. It features dual speed mode: fixed speed (presettable) and adjustable speed. They accept any of the standard range Imada force gauges. Speed control, quick return and emergency stop switches are standard features.  Optional digital distance meter available.
Auto Cycle Models

Auto cycle models have top and bottom travel limits that can be adjusted for a precise range of movement. Speed Adjust, Quick Return and Emergency Stop features are also included. These stands have three function modes.

Manual Mode: While the Direction switch is held up, the head moves up. Holding the switch down moves the cross head down. When the switch is released the head stops. This mode is ideal for positioning.

Single Cycle Mode: When the Direction switch is pushed up, the cross head moves up at the desired speed, and when it reaches the top travel limit, it automatically goes back and stops at the bottom travel limit, completing one cycle. Pushing the switch down runs the cycle in reverse.

Auto Cycle Mode: This mode is similar to Single Cycle mode, except that the cross head travels up and down repeating the cycle until either the Power or Emergency switches is turned off. This mode is ideal for applications such as fatigue testing.
 

Lexan Safety Shield – LP-99

  • 1/4" unbreakable lexan
  • Helps protect personnel from injury by containing debris during testing
  • Allows access to the control panel

The lexan safety shield offers protection to the operators of motorized test stands. Access to the test stand controls is still available through the front of the shield. Made of 1/4" lexan, it is virtually unbreakable and will contain the debris from destructive testing. Helps to prevent accidental injuries. Fits all Imada motorized vertical test stands. Dimensions 16.5" x 15.75" x 31.5"