Contact | Company Info | Warranty | Repair | Home
Mechanical Force Gauges Digital Force Gauges Torque Testers Manual Test Stands Motorized Test Stands Attachments Push / Pull Testers Crimp Testers Peel Testers Spring Testers Puncture Testers Compression Testers Strength Testers Force Data Acquisition Torque Data Acquisition Calibration/Repair Trade In

Home | motorized test stands

Motorized Test Stand Accessories
 

The digital distance meter can be mounted to any Imada test stand and provides RS-232C output.

Distance Meter Specifications
Display
Push button for inch/mm, zero set and on/off
Resolution
0.0005"/0.01 mm
Accuracy
0.1% of reading or 0.005"/0.1mm, whichever is greater

The timer can be used with MX and MH motorized test stands to apply a force value for specific time period and then repeat the cycle continuously up to 72 hours.

Timer Specifications
Range
1 sec~99min, 59sec
Accuracy
±0.01%, ±0.05sec

 

 

 

Lexan Safety Shield – LP-99

  • 1/4" unbreakable lexan
  • Helps protect personnel from injury by containing debris during testing
  • Allows access to the control panel

The lexan safety shield offers protection to the operators of motorized test stands. Access to the test stand controls is still available through the front of the shield. Made of 1/4" lexan, it is virtually unbreakable and will contain the debris from destructive testing. Helps to prevent accidental injuries. Fits all Imada motorized vertical test stands. Dimensions 16.5" x 15.75" x 31.5"