|
This digital pull tester is for checking the pull-off force values
of electrical leads, crimped terminals, connectors, and soldered
parts. System consists of test stand and DS2 force gauge of your
choice. Choose optional pull test attachments wedge grip, cam grip,
vise chuck, WG-1 or WG-2 wire grip to suit your application (other
attachments available).
 WG-1 is perfect for pull testing crimp on terminals. Set the opening
size by turning the wingnut until jaws contact sample, then back off
a little until the sample slides into the jaws from the side. Then
you can simply slide the next sample into the jaws when you are
ready to test.
WG-2 grips the actual wire or sample tested with serrated jaws.
Ideal for a variety of shapes.
WG-3 multi terminal grip has 12 wire gauge apertures on the turret.
Locate the appropriate size, lock in position and you’re ready to
test.
The KC-100 spring-loaded wedge grip is ideal for tensile
measurements of thick materials (up to 10mm thick). The serrated jaw
is 15mm wide.
DS2 Ranges (Resolution) Accuracy: ±0.2% F.S. ±1 LSD
|
Model |
Capacity (Resolution)
|
|
|
Pounds/Ounces
|
Kilograms/Grams
|
Newtons
|
DS2-0.4
|
7.00 (0.01 ozf)
|
200.0 (0.1 gf)
|
2.000 (0.001 N)
|
DS2-1
|
18.00 (0.01 ozf)
|
500.0 (0.1 gf)
|
5.000 (0.001 N)
|
DS2-4
|
4.400 (0.001 lbf)
|
2.000 (0.001 kgf)
|
20.00 (0.01 N)
|
DS2-11
|
11.00 (0.01 lbf)
|
5.000 (0.001 kgf)
|
50.00 (0.01 N)
|
DS2-44
|
44.00 (0.01 lbf)
|
20.00 (0.01 kgf)
|
200.0 (0.1 N)
|
DS2-110
|
110.0 (0.1 lbf)
|
50.00 (0.01 kgf)
|
500.0 (0.1 N)
|
DS2-220
|
220.0 (0.1 lbf)
|
100.0 (0.1 kgf)
|
1000 (1 N)
|
Use an 'R' suffix for reverse display
units (for use on vertical test stands)
|
