|
This wire terminal crimp tester is a digital pull tester for
checking the pull-off force values of electrical leads, crimped
terminals, connectors, and soldered parts. System comes with test
stand and DPS force gauge of your choice. Choose optional pull test
attachments wedge grip, cam grip, vise chuck, WG-1 or WG-2 wire grip
to suit your application (other attachments available).
WG-1 is perfect for pull testing crimp on terminals. Set the opening
size by turning the wingnut until jaws contact sample, then back off
a little until the sample slides into the jaws from the side. Then
you can simply slide the next sample into the jaws when you are
ready to test.
WG-2 grips the actual wire or sample tested with serrated jaws.
Ideal for a variety of shapes.
WG-3 multi terminal grip has 12 wire gauge apertures on the turret.
Locate the appropriate size, lock in position and you’re ready to
test.
The KC-100 spring- loaded wedge grip is ideal for tensile
measurements of thick materials (up to 10mm thick). The serrated jaw
is 15mm wide.
DPS Ranges (Resolution) Accuracy: ±0.2% F.S. ±1 LSD
|
Model |
Capacity (Resolution)
|
|
|
Pounds/Ounces
|
Kilograms/Grams
|
Newtons
|
DPS-0.5
|
8.819 ozf (0.001 ozf) |
250.0 gf (0.1 gf)
|
2.452 N (0.001 N)
|
DPS-1
|
17.64 ozf (0.01 ozf)
|
500.0 gf (0.1 gf)
|
4.903 N (0.001 N)
|
DPS-4
|
4.409 lbf (0.001 lbf)
|
2.000 kgf (0.001 kgf)
|
19.61 N (0.01 N)
|
DPS-11
|
11.02 lbf (0.01 lbf)
|
5.000 kgf (0.001 kgf)
|
49.03 N (0.01 N)
|
DPS-44
|
44.09 lbf (0.01 lbf)
|
20.00 kgf (0.01 kgf)
|
196.1 N (0.1 N)
|
DPS-110
|
110.2 lbf (0.1 lbf)
|
50.00 kgf (0.01 kgf)
|
490.3 N (0.1 N)
|
DPS-220
|
220.5 lbf (0.1 lbf)
|
100.0 kgf (0.1 kgf)
|
980 N (0.1 N)
|
Use an 'R' suffix for reverse display
units (for use on vertical test stands).
|
