Contact | Company Info | Warranty | Repair | Home
Mechanical Force Gauges Digital Force Gauges Torque Testers Manual Test Stands Motorized Test Stands Attachments Push / Pull Testers Crimp Testers Peel Testers Spring Testers Puncture Testers Compression Testers Strength Testers Force Data Acquisition Torque Data Acquisition Calibration/Repair Trade In

Home | pull testers

Lever-Operated Horizontal Pull Tester
 

All items sold separately

PRICING
DELIVERY
SUPPORT
  • Horizontal test stand 
  • DS2 Digital Force Gauge (specify range) 
  • Crimp Test Attachments:
    Stand side: specify GT-30 Vise Chuck or WG-300 Cam Grip 
    Gauge side: specify WG-1, WG-2 or KC-1000 Grip
  • Max Load: 220 lbf
  • Outstanding accuracy of ±0.2%
  • Real time and peak mode (selectable)
  • Newton, lb and kg units are selectable
  • RS-232C, Digimatic and analog outputs



 

This digital pull tester is for checking the pull-off force values of electrical leads, crimped terminals, connectors, and all other pull tests. System consist of test stand and DS2 force gauge of your choice. Choose optional pull test attachments wedge grip, cam grip, vise chuck, WG-1 or WG-2 wire grip to suit your application (attachments for other applications are available).

WG-1 is perfect for pull testing crimp on terminals. Set the opening size by turning the wingnut until jaws contact sample, then back off a little until the sample slides into the jaws from the side. Then you can simply slide the next sample into the jaws when you are ready to test.

WG-2 grips the actual wire or sample tested with serrated jaws. Ideal for a variety of shapes.

WG-3 multi terminal grip has 12 wire gauge apertures on the turret. Locate the appropriate size, lock in position and you’re ready to test.

The KC-1000 spring-loaded wedge grip is ideal for tensile measurements of thick materials (up to 10mm thick). The serrated jaw is 15mm wide.

Crimp Test Attachments

gt-30.jpg (5958 bytes) wg3001.jpg (4389 bytes)
WG-1
WG-2
WG-3
KC-1000
GT-30 VISE CHUCK
WG-300 CAM GRIP

Click here for a complete list of special attachments

 

DS2 Ranges (Resolution) Accuracy: ±0.2% F.S. ±1 LSD     
Model
Capacity (Resolution)
 
Pounds/Ounces
Kilograms/Grams
Newtons
DS2-0.4
7.00 (0.01 ozf)
200.0 (0.1 gf)
2.000 (0.001 N)
DS2-1
18.00 (0.01 ozf)
500.0 (0.1 gf)
5.000 (0.001 N)
DS2-4
4.400 (0.001 lbf)
2.000 (0.001 kgf)
20.00 (0.01 N)
DS2-11
11.00 (0.01 lbf)
5.000 (0.001 kgf)
50.00 (0.01 N)
DS2-44
44.00 (0.01 lbf)
20.00 (0.01 kgf)
200.0 (0.1 N)
DS2-110
110.0 (0.1 lbf)
50.00 (0.01 kgf)
500.0 (0.1 N)
DS2-220
220.0 (0.1 lbf)
100.0 (0.1 kgf)
1000 (1 N)
Use an 'R' suffix for reverse display units (for use on vertical test stands)

Click here for complete DS2 force gauge specs